NDR511: DUAL-CHANNEL MICROWAVE BLOCK DOWNCONVERTERS
The NDR511 is a family of dual-channel block downconverters that cover 13 specific bands in the 6 GHz to 44 GHz frequency range. Each module downconverts the input frequency band to an IF output below 6 GHz (the IF output of each module is designed to be connected to the input of a 6 GHz tuner). CyberRadio Solutions provides a variety of Tuner solutions to provide final downconversion and digitization for digital IF data output streams. Each downconverter module contains two identical downconverters both driven by the same LO. The two downconverter channels are phase coherent to support interference identification on systems using cross polarization techniques as well as other phase coherent applications. The units powered by a +12 VDC external power input and require no external control. The units are packaged in 5.7" x 8.4" x 1.6" sized housing and constructed of a rugged aluminum chassis that provides RF shielding, thermal management, and protection suitable for harsh environments.
NDR511 Bands
- 6 GHz to 8.5 GHz
- 7.2 GHz to 10.8 GHz
- 10 GHz to 14 GHz
- 14 GHz to 18 GHz
- 17 GHz to 22 GHz
- 17.9 GHz to 26.5 GHz
- 22 GHz to 26 GHz
- 24 GHz to 42 GHz
- 26 GHz to 31 GHz
- 31 GHz to 36 GHz
- 36 GHz to 39.6 GHz
- 39.6 GHz to 32.8 GHz
- 42.8 GHz to 44 GHz
APPLICATIONS
- Spectrum Monitoring
- Wideband Recording System
- Radar Monitoring
- Portable Collection Sytems
- Satellite Communication Interference Monitoring
For a formal quotation, please contact sales@cyberradiosolutions.com
The NDR568 wideband microwave downconverter is an 8-channel banded converter which covers 2GHz to 18GHz. Each downconverter has an analog IF output at 4GHz with 2GHz bandwidth which allows sustained collection of the entire spectrum. The unit has integrated front end antenna switch unit to offer flexibility in system designs with multiple antenna sources. The unit also has an integrated test source to allow systems to inject test signals through the entire signal path. Command and Control of the wideband microwave downconverter is via the Gigabit Ethernet control port and power is derived from a 115 VAC external power supply input. The Gigabit Ethernet control utilizes an embedded ARM processor and LINUX operating System. The unit is packaged in a 2U, 19 Inch equipment frame constructed of a rugged aluminum chassis that provides RF shielding, thermal management, and protection suitable for harsh environments.